Product features
Effective fast-acting disinfectant with good cleaning properties, highly resistant to organic load. Erisan Des is intended for cleaning and disinfecting healthcare surfaces and instrument care (including ultrasonic cleaning) in compliance with hygiene requirements. Also intended for body fluid stains, disinfection of dental care equipment, cleaning of research and nursing supplies. Erisan Des has been tested for sensitive materials such as aluminum, rubber and various types of plastic.
Usage:
For immersion, surface disinfection and ultrasonic bath use at a dilution of 2-5%. Use cold clean water for dilution. Disinfect moisture-resistant surfaces, tools, equipment and inventory by wiping with a cloth dampened with the working solution or by spraying. For disinfection of medical inventory and instruments, use a soaking bowl with a lid and take into account the recommended soaking time to avoid damage to the materials. Fully immerse the instruments and tools in the solution and keep for the specified time. Prepare a new solution once or twice a week, depending on the contamination of the liquid. Unused clean solution and liquid in the wipe dispenser can be used for four weeks. Attention! For professional users only. Professional users must apply the occupational health and safety and waste management measures specified on the label and instructions.
KIILTO PRO ERISAN DES instrument, surface and equipment disinfectant
Spectrum of activity: Bactericidal (incl. MRSA), fungicidal, tuberculocidal, limited virucidal efficacy (incl. HBV, HIV, HCV), rotavirus. Listing: BfArM Approval No. 6281157.00.00, VAH.Cutasept F active ingredient: Propane-2-ol. Composition of 100 g solution: Active ingredient 63.0 g propane-2-ol, corresponding to 72% vol. Other ingredients: Benzalkonium chloride, purified water. Areas of application: Skin disinfection before punctures, injections and surgical operations. Surgical and hygienic hand disinfection. Where not to use: Do not apply in the immediate proximity of the eyes. Intolerance to ingredients. If applied properly, Cutasept F can be used when pregnant or breastfeeding. Side effects: Slight, scattered skin irritations are common. May produce an allergic reaction. Warning: Has not been sufficiently tested as a treatment for infants and small children. In these cases, this product may only be applied after stringent diagnosis and under medical supervision. Benzalkonium chloride may cause skin irritation. Do not apply to the skin beneath exsanguination cuffs. Do not apply surgical film until dry. Wait until dry before using electrical devices. Avoid accumulation on patient beds/seats. Do not expose to naked flame. Keep clear of ignition sources. There are no fire or explosion hazards associated with the proper use of this product. If the solution comes into contact with eyes, hold the eyes open and rinse with running water for several minutes. After spillage of the disinfectant, the following steps should be taken: Soak up the spilt liquid straight away, dilute with copious amounts of water, ventilate the room and remove ignition sources. Flash point according to DIN 51755: 21 °C. Flammable. Refilling may only be performed under aseptic (clean bench) conditions.
Skin disinfectants Cutasept® F
Delivery incl. overhead sprayer for 50, 250 and 500 ml bottles. Please order the hand-held spray head for the 1000 ml bottle separately.
Technical Information
Pack. 250 ml spray bottle